Search SunshineGlass.com
Sunshine is your Stained Glass Source! DROP AND DRAPE MOLDS
Rings for Drop Outs
Foot Drape Molds for Feet
By Creative Paradise

HOME > SHOPPING INDEX > FUSING > MOLDS > DROP AND DRAPE MOLDS

02/22/20


RELATED PAGES

FUSING

MOLDS

DROP AND FOOT DRAPE MOLDS


Drop and Drape Molds Give Dramatic Results With Out a Lot of Work

  • Use Drop Out Molds to make everything from dinner or dessert plates to tall, free form vases.
  • Drape Molds can be used to make draped bowls =or=
  • Combine a Drape Mold with a Drop Out Mold and two pieces of glass to make footed bowls and dishes.

CLICK HERE to go to Drop Out Molds

CLICK HERE to go to Drape Molds


Use this combination of drop out and drape molds, above, to make the dramatic piece below

DROP OUT MOLDS

A few items to keep in mind when using drop out molds

  • Fuse two or three layers of glass into your "blank" that will be slumped  The thickness will determine how deep a vase you can create
  • The blank should be close to the size of the drop out ring, BUT NOT LARGER. If it is even slightly oversize, the excess will drape over the outer edge of the ring and make removal impossible
  • Keep an eye on the progress of your slump. If the glass heats too quickly, you will get results with paper thin walls. If left too long, all of the glass will flow to the kiln shelf below, making an interesting blob.

ROUND DROP OUT MOLDS
Use Drop Out Molds to produce dramatic free form vases, bowls and dishes.


Round Drop Out Mold, 6"
6" outside diameter
with 3-7/8" diameter center opening

Order # GMM 62
$16.98 ea


Round Drop Out Mold, 8"
8-1/8" outside diameter
with 5-1/8" diameter center opening

Order # GMM 63
$20.98 ea

PLATE RING MOLDS
Use Plate Rings the same as Drop Out Molds above -OR- set the Plate Ring Mold directly on the kiln shelf (with kiln shelf paper), add your round glass blank and slump. This will give you your standard dinner plate cross section. Note the ring ridge on the inside opening.

Small 6" Plate Ring
6" outside diameter
with 3" diameter center opening. Use with GMM 95 Drape Foot Mold for a small footed dish

Order # GMM 94
$17.98 ea


Mold GMM 94 (on top) used with GMM 95, showing a footed bowl in progress
Large 10" Plate Ring
10" outside diameter
with 6-3/4" diameter center opening. Use with GMM 90 Drape Foot Mold to make a footed dish

Order # GMM 87
$31.98 ea

SQUARE DROP OUT MOLDS
Can be used to create different and unusual square vases, or use with foot drape molds, below to make square footed bowls


Use with Foot Drape Molds to make square footed dishes

Square Drop Out Mold, 6"
6x6" Overall
with 4x4" Opening
Use with GMM 106 to make a square footed dish

Order # GMM 14
$18.98 ea


Square Drop Out Mold, 8"
8x8" Overall
with 5x5" Opening
Use with GMM 104 to make a square footed dish

Order # GMM 15
$25.98 ea


Square Drop Out Mold, 10"
10x10" Overall
with 6x6" Opening

Order # GMM 16
$31.98 ea

 

FOOT DRAPE MOLDS

Foot Drape Mold for GMM 94
6" diameter and 3" tall.
Use with GMM 94 Plate Ring Mold to make a footed dish as shown at right

Order # GMM 95
$44.98 ea


GMM 90 Mold
Foot Drape Mold for GMM 87
11" diameter to be used with GMM 87 Plate Ring Mold to make a footed dish as shown at right

Order # GMM 90
$52.98 ea


GMM 90 Mold shown with GMM 87 plate mold on top, ready to make a footed dish

GMM 104 Large Square Drape Foot Mold
Large Square Foot Drape Mold for GMM 15

9x9x4" overall size is made to be used with the 8x8 square drop out mold (GMM 15) to make totally different footed dishes, such as the one shown at right

Order # GMM 104
$52.98 ea


GMM 104 Drape Foot Mold shown with GMM 15 in place, ready for glass
SHOP HOURS
CLICK HERE TO SEE OUR SHOWROOM AND ORDER DESK HOURS
  HOME SALE ITEMS NEW PRODUCTS  
  SHOPPING INDEX NEWSLETTER DIRECTIONS & MAP  
  REQUEST OUR CATALOG SEARCH PRIVACY  


Sunshine Glassworks Ltd.
Sunshine Square, 111 Industrial Pkwy, Buffalo, NY 14227
1-800-828-7159 or 1-716-668-2918 or fax to 1-716-668-2932

All contents and illustrations are 1997 thru 2019 by Sunshine Glassworks Ltd.