18" Diameter and 13" Depth
Sold With SetPro or RampMaster III Controller

The GTS-18 Series gives you added depth and diameter for working larger projects. This kiln is a great kiln for the smaller studio as it gives you the capacity to use a 15" diameter kiln shelf. The 13" depth handy for drop out molds and floral formers. Requires a 240 volt, 40 amp electrical circuit. Shown with standard eight inch kiln stand. Scroll down to purchase the optional 16in tall stand.

The RampMaster 3 Controller with Express Mode gives you ultimate control.  Express Mode is a three step program: Set the COE of the glass you are firing, your firing style (slumping, tack fuse, full fuse or casting) and the speed you wish to fire at. Use the Custom Mode to enter the ramp (rate of temperature change) set point (the target temperature) and any soak (time spent at target temperature).  Up to 32 different segments (ramp, target temperature and soak = 1 segment) may be programmed in. And the unit will store 12 programs (sets of segments that make up your firing schedule) for quick and easy recall.

While the kiln fires, the controller display shows the current kiln temperature and which segment is being processed. While your program is running, you have the flexibility to change settings on the fly.
New Alarm Feature: RampMaster III controllers have an option to sound an alarm to tell you that your program is at the "process phase" where control or intervention on your part might be critical. You can then keep an eye on things as your glass begins to slump or when you reach full fuse. An alarm can also be set to let you know when your work is entering the annealing phase. In that way, you can check to be sure your piece has fused or slumped to your satisfaction.

• top and side elements for even heat distribution
• firing chamber dimensions are: 17.5" diameter x 13" deep
• maximum working temperature: 1800°F (982°C)
• includes stand to raise unit from the floor
• UL listed (US) and C-UL listed (Canada)
• Ships via Motor Freight. We will contact you regarding this added cost.
• Allow 4-6 weeks for delivery

ALSO AVAILABLE WITH SETPRO CONTROLLER

The Set Pro Controller is a snap use.  You easily enter the ramp (rate of temperature change) set point (the target temperature) and any soak (time spent at target temperature).  Up to eight different segments (ramp, target temperature and soak = 1 segment) may be programmed in. And the unit will store four programs (sets of segments that make up your firing schedule).

Set up is quick and easy with digital read-out and three buttons for entering your firing schedule.  While the kiln fires, the controller display shows the current kiln temperature and which segment is being processed. While your program is running, you have the flexibility to change settings on the fly.

Allow 4-6 weeks for delivery.