|
GRYPHON CONVERTIBLE GRINDER |
|
SAVE YOUR BACK AND USE
THIS GRINDER IN THE SLANTED MODE
|
|
"Finally,
a real reason to upgrade your grinder"
Every time
a new grinder shows up on the market, you need to search hard for a good
reason to upgrade from your current grinder to the new kid on the block.
Well, the
Gryphon Convertible Grinder
has certainly given you the reason. Comfort while grinding has
never been greater. The slanted work surface means you don't lean
over to do your grinding. Place the grinder on a desk and you can
do your work seated. You don't need to have a bad back to
appreciate the improvement. And it would be one thing if you put a
slant on a run-of-the-mill grinder, but put it on this grinder and you
have a package that can't be beat.
Shown above in the
standard "Flat" configuration.
|
Check these features:
- high
torque DC motor gives you all the power you need to grind quickly =
and it won't stall under load
- built in
water pump keeps your bit cool and lubricated.
- you
can feed the water to the bit either above or below the work surface
- water
feed quickly routes to the included upper work surface when using smaller bits.
- use
the traditional wet sponge (included) if you rather
- 13 x
10 in work surface gives you
plenty of room
-
adjustable splash guard allows for bigger pieces of glass
- comes
with 1" and 3/4" diamond grinder bits.
- Accepts bits
from most other manufacturers
- QUIET
motor lowers work area noise
- FIVE
YEAR WARRANTY
Order #0355
$365.99
|
|
GRYPHETTE MINI GRINDER |
|
THE MOST AFFORDABLE
GRINDER COMES ON THE MARKET
Compact
6-3/4 x 6-3/4" Work Surface Size
8x8x7" Tall Overall Size |
|
Gryphon's GRYPHETTE is the best value
today. Like the Convertible Grinder above, the Gryphette comes with a
high torque DC motor that you just can't stop. Plenty of power to let you
use efficient 1" bits.
The Gryphette makes glass grinders
affordable to entry level hobbyists. These grinders will let you pick
up a powerful, capable grinder that takes a minimum of space at a minimum
cost.
For more accomplished hobbyists, this will be the perfect
compliment to your current workhorse grinder. It will fit in the smallest
corner on a workbench and provide all the power you need.
Comes with a standard 3/4" bit.
Will accept most 1" or 3/4" grinder bits that are on the market today
Order #0356
Order # 0356
$145.99
|
|
GRYPHON STUDIO GRINDER |
|
A TERRIFIC MID-RANGE
GRINDER FOR THE SERIOUS HOBBYIST
A COST EFFECTIVE CHOICE
FOR ART GLASS STUDIOS
Large 9-3/4 x 9" Work Surface |
|
Like the all of Gryphon Grinders, the Studio Grinder comes with
a high torque DC motor that you just can't stop. Plenty of power, in a quiet
package.
The coolant is fed to the
grinder bit from a reservoir located behind and above the bit
assuring you consistent performance. The flexible splash guard helps
keep your work area clean.
This well made, high performance
grinder will give you years of service.
Comes with a standard 1" bit and
eye shield.
Will accept most 1" or 3/4" grinder bits that are on the market today
Order #0357
$214.99
=Unavailable at this time=
|
