FAST INDEX TO THIS PAGE
WARNING:
Products on this page can expose you to chemicals including lead which is known
to the State of California to cause birth defects or other reproductive
harm.
For more information go to
www.P65Warnings.ca.gov. |
HAKKO TEMPERATURE CONTROLLED IRON |
The Hakko FX-601 is a soldering iron with a
dial temperature control that actually controls the TEMPERATURE and
not the power level. |
|
Temperature range: 464°-1004°F
Ceramic heating element provides fast
heat recovery.
Temperature control sensor in
heater ensures consistent heat
Efficient heating (requires less
energy = less wattage needed)
Slender, ergonomic handle with 3-wire
power cord
Hakko FX-601 Soldering Iron with Temperature Control
Order #39290, $109.98
|
|
Replacement Tips
#39291, 3/16" wide tip, as supplied with the iron
$26.59 ea
#39292, 1/4" wide tip
$26.59 ea
|
STUDENT QUALITY IRONS |
These are
perfect, inexpensive starter irons. Decent quality at a modest
cost. Imported. |
|
100 WATT HOBBY IRON BY DTI
(#39270)
A great first iron, it will get the job done without a big
investment. With a stay cool handle.
$21.49
|
|
STUDIO 100 TEMPERATURE CONTROL IRON BY
DTI
(#39280)
This is DTI's answer to the pricier Weller W-100
temperature controlled iron. Iron will heat to 750°F, just about the
perfect temperature for foiled or leaded work. With knurled nut to
hold the tip in place, you won't have to worry about tips freezing
in place. 100 watts. Comes with 3/8" chisel tip installed.
$83.99
|
|
100 WATT WOOD HANDLE IRON BY LEPONITT
(#39250)
The wooden handle is comfortable, cool and helps balance the
iron while in use. Uses 3/8" diameter tips. Great value!
$30.99
|
|
100 WATT STUDENT IRON WITH BLUE
HANDLE
(#39260)
A well made iron at a great price. Perfect starter iron for the
stained glass novice. Uses 5/16" diameter tips.
=Unavailable at this time=
$41.99
|
BEST SELLING IRONS |
With their moderate prices and fine quality,
these soldering irons have been best sellers for years and
years. |
MIKA INTERNATIONAL produces Studio
Line quality soldering irons which are dependable and reasonably priced.
Mika irons are up to the task of heavy copper foil work, and come with a
1/4 tapered chisel, iron clad tip with a 3/8 shank. UL Listed and
a 1 year warranty. Reasonably priced and sturdy.
The Mika 100 Watt iron is our most popular Iron! Imported
from S. Korea |
|
MIKA STUDIO LINE 100 WATT SOLDERING IRONS
Order # 0755
$44.95 each
|
WELLER IRONS
have been popular with the stained
glass trade for decades. Unique features, modest prices and
international reputation all make Weller irons great sellers.
Imported from Mexico |
Weller 80 Watt Iron with two tips |
WELLER
80 WATT 8012A IRON (#07522) is a popular 80 watt soldering that comes with two
popular tips. Extra comfortable handle. This iron is popular with stained glass teachers as it is dependable and
reasonably priced. You will find the
3/8" wide long chisel tip to be an all purpose tip,
and a 3/8" blunt chisel tip is also included.
$56.88
|
Temperature Controlled
Additional Tips are available
for 700°, 800° and 900° operating temperatures |
WELLER
W-100 IRON (#0745) is supplied with a 3/8" diameter
tip. This temperature controlled iron keeps the tip temperature from
exceeding 700° F. This feature allows you to work without melting lead came,
and eliminates the need for an iron control.
$109.99
|
80 Watt Iron with Iron Control |
WELLER WLC-200
SOLDERING STATION (#0760) combines a lightweight 80 watt stained glass
soldering iron with a built in iron control, iron stand and tip cleaning
sponge. This station is your all-in-one soldering product. Iron
features a replaceable 80 watt element, 3/8" plated chisel tip and foam
grip. Controller adjusts from 5 to 80 watts of power, allowing you to select
the heat needed for the job at hand. Coiled iron holder and natural sponge
complete the package. Has on/off switch with red pilot light.
$129.88
|
Top of Page |
HEXACON INDUSTRIAL QUALITY IRONS |
Hexacon Irons are industrial quality irons. Designed
for continuous daily use, these irons are the best made product on the
market. Used for decades in professional studios across the country,
Sunshine Glassworks is happy to make this fine product line available to
everyone.
Free shipping on Hexacon Irons shipped to
addresses in the USA
|
Click
here to see additional tips
Click here for replacement parts |
"A"
SERIES
60 WATT IRON (#39300) is a nice, lightweight
iron suited for smaller projects, such as suncatchers or smaller
foiled work. Does a terrific job when doing decorative soldering
work. Comes with a 1/4" wide iron clad chisel tip. The best little
iron you can buy. Features a replaceable stainless steel element.
8" long overall, 5 oz light.
$113.99
|
HEXACON
POWERHOUSE 100 WATT IRONS bridge the gap between small pencil style irons and the big heavy duty
workhorse irons. Precision made for long life and daily
use. These middle weight irons are light enough so your arm
won't tire, but have the heat output you need to get the job
done. Both styles include 1/4" wide taper chisel tip with
5/16" diameter shank. Choose from: |
Click here
to see additional tips
Click here for replacement parts |
PENCIL
STYLE (#39310)
11" long, 11.9 oz, $163.99
|
Click here
to see additional tips
Click here for replacement
parts |
HATCHET
STYLE (#39310H)
The Hatchet configuration repositions the center of gravity making
the iron easier to handle and control. Puts less stress on
your arm and wrist. Includes special hatchet wire stand, as
shown.
7" x 4½" overall, 10.9 oz
$170.99
|
HEXACON
HEAVY DUTY SERIES IRONS are the most rugged heavy duty irons
available for continuous studio soldering. These irons feature a near
indestructible outer element case made from a single piece of high
strength nickel plated alloy steel. Each iron has a triple ringed heat
interrupter/deflector to keep the handle cool and comfortable and make the
shaft shorter, allowing for a more well-balanced tool. Also unique to
these irons is the energy-absorbing nut which securely holds the tip in
place. This nut also cushions the element from jolts when the iron is
dropped into its holder, prolonging the life of the iron and element. All
of the HEAVY DUTY SERIES of irons are equipped with long lasting iron-clad
Xtradur tips and independently replaceable tip, element, cord and handles.
Use 150 and 175 watt
irons for most soldering tasks such as came work or copper foil
work. Use the 200 watt and larger irons for working on wider lead or
zinc cames or for attaching rebar. |
The Hexacon 150 Watt Iron is our best selling
Hexacon Iron
Click here to see additional tips
Click here for replacement parts |
150 WATT
INLINE PENCIL STYLE (#39320)
Comes equipped with a 5/16 wide tapered chisel tip with a 3/8 shank.
12" long, 18.8 oz Shown on the included wire style iron stand.
$250.99
|
Click here to
see additional tips
Click here for replacement parts |
175 WATT
HATCHET STYLE (#39330H)
The Hatchet style repositions the center of gravity closer to the hand.
Ergonomic studies have shown that this reduces stress and fatigue on the users
arm. Equipped with a 5/16 tapered chisel tip with a 3/8 shank. 7½
x 5½" overall, 19 oz. Includes special hatchet style stand as shown
with 100W iron above.
$289.99
|
Click here to
see additional tips
Click here for replacement parts
|
200 WATT
INLINE PENCIL STYLE (#39340) is equipped
with a ½ chisel tip with a ½ shank. 12½" long, 21.8 oz. Includes
wire stand, as shown with 150W iron above.
=Unavailable at this time=
$319.99
|
Click here to
see additional tips
Click here for replacement parts
|
250 WATT
INLINE PENCIL STYLE (#39350) has a 5/8 chisel tip with a 5/8
shank. Shown in cradle holder that is included. Hefty 29.4
oz, 12½" long.
$325.99
|
Click here to
see additional tips
Click here for replacement parts
|
300 WATT
INLINE PENCIL STYLE (#39360) has a hefty 7/8 chisel tip with a
7/8 shank. A whopping 39.5 oz weight, same 12½" length. Includes
cradle stand. $399.99
|
Replacement Hexacon Tips
Hexacon
Replacement Elements |
If you need something larger, drop us an
e-mail. Hexacon makes bigger irons, up to 900 watts. Our e-mail address:
|
FREE
SHIPPING
Free shipping applies
only to delivery addresses in the Continental US (Lower 48 States). Shipments outside the
Lower 48 are not eligible for free shipping
Free Shipping applies only to standard ground shipping via the
carrier of our choice.
If your order
contains only items with FREE SHIPPING noted, there will be no
shipping and handling fee added to the order. When checking out, the
Choose Shipping option will be grayed out as you will not be charged
for shipping. If your order
includes items without the FREE SHIPPING offer, the shipping and
handling fee will be computed on just the items without the FREE
SHIPPING notation.
WARNING:
Products on this page can expose you to chemicals including lead which is known
to the State of California to cause birth defects or other reproductive
harm.
For more information go to
www.P65Warnings.ca.gov.
Top of Page
|