|
THE GRINDER2
|
THE GRINDER 2
is a scaled down version of THE
GRINDER, but with the same power and ability.
Check the feature list:
-
Highly efficient proprietary
1/6 hp motor develops 57 in/oz torque and 4500 rpm with minimal
electricity usage
-
Low profile design,
comfortable to use
-
Generous 11 x 9½ in work surface
-
Motor design prevents
overheating and absorbs vibrations - super quiet to use!
-
Built in accessory drawer
-
Work surface and tray remove for
easy cleaning and filling
-
3/4in Quick Fit Bit with
3/4in stainless steel Bit Guard
-
Threaded, open-tip shaft for
1/4″ and 1/8″ grinding bits
-
Aqua Flow System replaces
grinder sponge
-
5 year warranty
-
Designed and produced in
North Tonawanda, NY
=Unavailable at this time=
$249.99
OPTIONAL ACCESSORIES
|
|
Optional Lumishield2 with LED Light and
Eye Shield |
 |
The patent pending LED illuminated lens-grade
eye shield can be easily attached. It provides protection from
minute glass particles that become airborne and also casts an even
amount of light across the work surface.
Equipped with an energy efficient, super-brite
LED light to best illuminate the project you are working on.
Order TG G2 LK, Lumishield 2 Kit
$49.99
|
|
Optional The Guard2 Splash Curtain |
 |
The patented wear-resistant splash curtain is
designed to maintain a clean and dry work area. The best idea yet!
Glass pieces of unlimited length easily slide
through the bristles which capture debris and return water
to the reservoir.
Order TG G2 SG, The Guard2
Splash
Curtain
=Unavailable at this time=
$29.99
|
|
Optional The
SET Straight Edge Tool |
 |
The SET tool is made to give you fast and
accurate straight edges on square or rectangular shapes.
The G-2 SET works on both THE GRINDER 2's
and THE GRINDER 3's
CLICK HERE for
descriptive literature and complete instructions
Order TG G2 SET,
The SET 2 Straight
Edge Tool
Regular $42.99
|
|
Optional Elevated Work Surface for 1/8 and 1/4 Inch Bits |
 |
The secondary platform with water reservoir is
sold separately and can be placed atop the main grid enabling use
of 1/4″ and 1/8″ spindle top bits.
- Platform
Dimensions: 1.2″ H x 5.8″ W x
4.8″ D
- EZ-View Window
& Lift Grid: Effortlessly monitor the water level or remove the
Lift Grid for the addition of water or cleaning
- Includes orange
Aqua Flow System brush
Order TG GSKIT, $21.99 Elevated Work Surface
$21.99
|
|
Optional Mini G Bits with 1/8 and 1/4 Inch Bits |
 |
Use the Mini G Bits with both THE GRINDER
and THE GRINDER2.
- 1/8in Bit
- 1/4in Bit
- Orange water
seal
- Bits thread
into the top of the grinder shaft
Order TG GMB, $33.99 Mini G Bits
$33.99
|
|
Optional 1
Inch Quick Fit Bit and 1 Inch Everwear Bit Guard |
 |
The Grinder2 has more than enough power to
utilize the faster grinding 1" diameter bits.
Order TG QFBS 200-1
1" Quick Fit Bit
with Standard Grit Diamond Sleeve
$31.99
|
|
 |
Everwear®
Bit Guard
Made from stainless steel, the bit guard
allows for a secure fit between the Quick-Fit Bit®
and the Grid.
Order TG GS1, 1" Everwear Bit
Guard
$21.99
|
|
REJUVENATE
DIAMOND BLADES WITH DRESSING STONE |
|
 |
DIAMOND DRESSING STONE
Rejuvenate worn diamond blades by
cutting a sliver off of this dressing stone. The stone will sharpen
the diamonds and will remove build up from the blade resulting in a
restoration of cutting action.
Stone is ½x½x6 inches long. Good for
many, many blade treatments.
Also works to refresh diamond grinding bits.
$11.99
Order #03625
|
