|
All caps on this page are made
from brass and are unfinished. They may be tinned (coated
with solder) and patinated to match your lamp shade. We
recommend Solder Magic
Action Tin to quickly, easily and evenly coat caps with
a thin layer of solder. |
|
VENTED ROUND BRASS CAPS |
|
Vented caps
are the most popular. Made of spun and stamped solid brass in diameters
from 1½" to 5½". The diamond vents allow heat from the light
bulb to dissipate. The number of vent holes varies depending on cap
diameter. |
Choose sizes from 1½ to
5-3/4
inches |
|
1in Series |
4in Series |
|
|
|
|
2in Series |
5in Series |
|
|
|
|
3in Series -
Most Popular! |
|
|
|
|
|
|
UNVENTED ROUND BRASS CAPS |
|
Unvented caps
are made of spun solid brass in diameters
from 1" to 6". |
Choose sizes from 1¼" to
6" |
|
1in Series |
4in Series |
|
|
|
|
2in Series |
5in Series |
|
|
|
|
3in Series -
Most Popular! |
6in Series |
|
|
6" Unvented Cap
6in #6020 $11.29
|
|
|
PERFORATED ROUND BRASS CAPS |
|
These are
flatter in profile with perforations to release heat build up. Quite
often seen on fancy Tiffany style lamp shades. Raw brass finish. |
|
Perforated Caps
NOTE: appearance may vary slightly from illustrations at right
|
|
|
MULTI-SIDED CAPS |
|
Not every lamp will
want a round cap. From four sides to twelve, we have them
ready for you. Like all of the caps above, these caps are
stamped (or spun and stamped) from brass and are unfinished. |
|
Square Caps
Unvented
Unavailable at this time
|
Unavailable at this time |
Unavailable at this time |
1-3/4"
Square, Unvented
#6040 |
2-7/8"
Square, Unvented
#6041-UV |
|
|
Square Caps
Vented
|
Unavailable at this time |
 |
1-3/4"
Square, Vented
#6040-V |
2-7/8"
Square, Vented
#6041 |
|
|
Multi Sided Caps
All caps are 3-1/8" across the flat sides
All come as the diamond vented style
|
 |
 |
|
Six Sided
#6051 |
Eight Sided
#6043 |
 |
=Unavailable at this
time= |
|
Ten Sided
#6045 |
Twelve
Sided
#6047 |
|
|
|
|
