QUICK INDEX TO THIS PAGE

Glass Cleaners
Flux Cleaners/Neutralizers
Hints

Due to shipping restrictions, we are unable to ship certain chemicals via Air or through the mail. Items with these restrictions will be noted. We are unable to ship these items to PO Boxes or foreign destinations. They must ship via UPS Ground ONLY.

Kwik Clean is a 16 oz bottle of non-toxic, biodegradable, non-corrosive cleaner that removes all flux and patina from your glass projects. All residue is quickly neutralized and your piece is left clean and shiny. Use it to remove sticky foil glue from your foiling machines, too. You'll love it.

No Air or Mail shipments
Shipments via UPS Ground to lower 48 US States ONLY

Order #0697
$14.95

Use this as the finishing touch for your stained glass piece. Especially formulated by 2010 Glass, it is the result of a search for the perfect cleaning, waxing and polishing agent for stained glass work. It polishes your patinated work (gives copper patina the look of a shiny penny) and leaves a wax finish to prevent tarnishing. 12 oz. squeeze bottle, lasts a long time.

This product is very similar to the Stained Glass Finishing Compound sold by Clarity Designs or under the name "Kem-O-Pro".

No Air or Mail shipments
Shipments via UPS Ground to lower 48 US States ONLY

Order #0992
$13.49

CJ's is our best selling flux and patina remover! gets rid of the greasy mess and residues from all types of flux. It prevents the oxidation crust on lead and foil which forms as a result of improper cleaning. It also helps to remove patina stains from glass. Use CJ's before you patina your work to allow patina to work properly. Available in 8 and 16 oz bottles.

Order #0695, 8 oz CJ's
$7.29

Order #06951, 16 oz CJ's
$11.99

PATINA PAL

You will be amazed at how well this little gem works!

PATINA PAL

Clean your solder seams with the Patina Pal with a neutralizing cleaner such as CJ's Flux and Patina Cleaners before applying your patina. It scrubs your solder clean helping to remove any oxidation while leaving behind no residue. Far superior to steel wool which can leave tiny bits of steel behind that then rust or turn your black patina brown. The brass Patina Pal doesn't shed, doesn't rust. Lasts and lasts.

SPECIAL NOTE: Our Patina Pal is twice the size of comparable product seen on the web. Double the size, half the work, twice the life - for only a bit more than the pint sized stuff out there.

Order #07890
$3.09

• NEVER use too much flux! Excess flux trapped in your solder seams will corrode your solder from the inside out, leaving a white, powdery residue. It doesn't matter how often you scrape this corrosion, it always returns because the flux is INSIDE the solder bead.
• The answer is to use your flux as sparingly as possible. Apply with a Q-tip, if need be!
• An extra harsh (ie. industrial or sheet metal) flux will give you white powder troubles, no matter how little you use. Be sure your flux is designed to work with stained glass.
• When used properly, the fluxes sold by Sunshine Glassworks won't corrode if promptly washed off your work. Use The Solution, CJ's Flux and Patina Remover or Kwik Clean for removing and neutralizing flux residue.